联系我们

English: +(86) 13823446125

WeChat: 13823446125

中国区代理: 13802685284

卷帘门电机选择Rolling door motor selection

卷帘门电机简介

卷帘门电机在现代建筑中扮演着至关重要的角色,尤其是在商业和工业场所。东荣DONGRONG电机作为行业领先品牌,以其卓越的品质和性能在市场上占据重要地位。本文将详细介绍东荣卷帘门电机的特点、安装方法以及其在市场上的优势。

东荣卷帘门电机的主要特点

1.重量轻,体积小,质量好:东荣卷帘门电机设计紧凑,适用于各种安装环境。

2.噪音低,振动小,功耗少:该电机采用先进的减噪技术,确保运行平稳安静,节能环保。

3.造型美观,先进构造;动力强劲,节约能耗:现代化的设计与强大的动力输出完美结合。

4.安装简易,方便周到;电动手动,双重配套:无论是电动操作还是手动应急,东荣电机都能轻松应对。

5.遥控操作,防火防盗;断链保护,安全可靠:多重安全保护措施,确保使用过程中的可靠性。

电动卷帘门电机安装方法

1.确定导轨安装位置:在防火卷帘门的两侧确定导轨安装位置,用锤线放出导轨基准线,放出导轨连接件固定螺栓十字线,导轨超过吊顶不小于75cm。

2.固定连接件:用冲击钻在墙柱上打出连接件固定膨胀螺栓孔,连接件的间距不得大于600 mm,两端距导轨口100 mm。先上下固几块连接件,将导轨贴上,校正其垂直并点焊。

3.装上其余连接件:连接件与导轨之间采用点焊,每件连接件与一导轨间点焊点不少于5点,点焊的宽度不小于5 mm,焊接处绝不应穿现象发生。采用不锈钢导轨时焊条采用不锈钢焊条。

Introduction to Roller Shutter Motors

Roller shutter motors play a crucial role in modern buildings, especially in commercial and industrial settings. DONGRONG motors, as a leading brand in the industry, stand out in the market with their superior quality and performance. This article will detail the characteristics, installation methods, and market advantages of DONGRONG roller shutter motors.

Key Features of DONGRONG Roller Shutter Motors

1.Lightweight, Compact, and High-Quality: DONGRONG roller shutter motors are designed to be compact, making them suitable for various installation environments.

2.Low Noise, Low Vibration, Low Power Consumption: These motors use advanced noise reduction technology to ensure smooth and quiet operation, making them energy-efficient and environmentally friendly.

3.Aesthetic Design and Advanced Construction; Powerful and Energy-Saving: The perfect combination of modern design and strong power output.

4.Easy Installation and Convenient; Dual Electric and Manual Operation: Whether it is electric operation or manual emergency, DONGRONG motors can handle it with ease.

5.Remote Control, Fireproof and Theftproof; Chain Break Protection for Safety: Multiple safety protection measures ensure reliability during use.

Installation Methods for Electric Roller Shutter Motors

1.Determine the Installation Position of the Guide Rail: Determine the installation position of the guide rail on both sides of the fire roller shutter door. Use a hammer line to set the baseline of the guide rail and the cross line of the fixing bolts of the guide rail connectors. The guide rail should extend no less than 75 cm beyond the ceiling.

2.Fix the Connectors: Use an impact drill to make expansion bolt holes for fixing the connectors on the wall columns. The spacing of the connectors should not exceed 600 mm, and the distance between the two ends and the rail mouth should be 100 mm. Fix several connectors vertically first, then attach the guide rail, correct its verticality, and spot weld it.

3.Install the Remaining Connectors: The connectors and the guide rail should be spot welded, with no less than five points of spot welding between each connector and the guide rail. The width of the spot welding should not be less than 5 mm, and the welding should not show any wear and tear. When using stainless steel guide rails, stainless steel welding rods should be used.

Conclusion

DONGRONG roller shutter motors are renowned for their quality and reliability. Whether it’s the advanced noise reduction technology, the robust and energy-saving power output, or the ease of installation and use, DONGRONG motors are the preferred choice for many commercial and industrial applications. By following the installation methods described, you can ensure optimal performance and safety for your roller shutter doors.