联系我们

English: +(86) 13823446125

WeChat: 13823446125

中国区代理: 13802685284

卷帘门电机接线指南及注意事项  How to Wire Roller Shutter Motor and Precautions

卷帘门电机怎么接线  Wiring Method for Roller Shutter Motor

电动卷帘门是由多关节活动的门组合,通过电动机来控制门的开关。卷帘门电机安装好后,要接好线才能正常使用。以下是关于如何接线的指南。

Electric roller shutters consist of multiple hinged doors that are controlled by a motor. After installing the roller shutter motor, proper wiring is essential for its normal operation. Here is a guide on how to wire it.

1. 单相电机接线方法  Single-phase Motor Wiring Method

以卷帘门单相电机为例,这种电机通常有五根引线:蓝、白、白、红、黑。通过测量这五根线之间的阻值,可以判断出各线的用途。蓝线为公共线,即零线,与电机外壳连接在一起。红、黑线接25uF启动电容,并且作为正反向运转的接线。两根白线之间的阻值为0Ω,一般内接过热保险管即可。

Taking a single-phase motor as an example, this type of motor usually has five leads: blue, white, white, red, and black. By measuring the resistance between these five leads, the purpose of each lead can be determined. The blue lead is the common lead, which is the neutral line and is connected to the motor casing. The red and black leads are connected to a 25uF starting capacitor and serve as the wiring for forward and reverse rotation. The resistance between the two white leads is 0Ω, which is usually connected to an internal thermal fuse.

2. 纠正转向错误 Correcting Direction Errors

如果在连接之后出现转向错误的问题,则需要对线路进行调整。可以任意选两根电源线调整一下,就能解决转向问题。

If a direction error occurs after connection, the wiring needs to be adjusted. Any two power lines can be selected and adjusted to resolve the direction issue.

卷帘门电机接线注意事项  Wiring Precautions for Roller Shutter Motor

电动卷帘门的电机在接线过程中,一定要合理将它接好才行。在接线时,有以下几个需要注意的事项:

The motor of the electric roller shutter must be properly wired during the wiring process. Here are some precautions to take when wiring:

1.接线前切断主电路电源:避免发生危险。

2. 遵循接线图:购买卷帘门电机时一般会附赠接线图,按照接线图的要求和指示进行接线操作即可。

3. 正确连接火线、零线:接线时,注意电机电源的火线、零线不要接反,三相电源输入的火线、零线也不要接反。

4. 正确连接上、下限位开关:卷帘门电机的上、下限位开关不要接反,一般专用备电插头正确插入即可。

1. Cut off the main circuit power before wiring: This is to avoid danger.

2. Follow the wiring diagram: A wiring diagram is usually provided when purchasing a roller shutter motor. Follow the instructions and requirements of the wiring diagram for wiring operations.

3. Connect the live and neutral wires correctly: When wiring, pay attention to not reverse the live and neutral wires of the motor power supply, and do not reverse the live and neutral wires of the three-phase power input.

4. Correctly connect the upper and lower limit switches: Do not reverse the upper and lower limit switches of the roller shutter motor. Generally, the dedicated backup plug can be correctly inserted.

在此过程中,请确保使用合适的工具和设备,遵循所有安全标准和规范。通过正确的接线和安装,东荣卷帘门电机将为您的卷帘门系统提供可靠和高效的运行。

By following these guidelines and precautions, you can ensure the safe and effective operation of your roller shutter motor. The proper connection and installation of the motor are crucial for the longevity and functionality of your roller shutter system.